Could that mean the lamp is shot? The problem is that once you have gotten your nifty new product, the panasonic hdtv manual model pt50lc14 gets a brief glance, maybe a once over, but it often tends to get discarded or lost with the original packaging. I think that there is another thermal fuse on this set but I am not sure of the location just yet. It sounds like it's coming from down near the lamp area. There must be continuity through the fuse in order for the ballast to operate. And there's some kind of deposit on the housing around it.
Is there any special way to test it, or do you just check if it has continuity or not? Alright, I just got home from work and looked at it some more. While I'm at it, here are some pictures of the lamp. Usually, that is the first thing I try if I have a spare test lamp. When I reseated the cable and got the same thing. With an older set like this, and with how you described the condition of the lamp, I would suspect that the lamp is bad. What do you guys think? Also, there is a thermal fuse located on top of the lamp housing. Now, as for the thermal fuse, is it actually on the lamp housing, or is it above where the lamp goes? I am new to this forum and am hoping for some help.
Is this the fuse here? Hey guys, new user here. So maybe that's not even an issue with mine. Would that be the sound of the ballast you mentioned? Then again, if I hear my ballast clicking, would that automatically mean the fuse is good? So maybe I should start with the lamp. I have tried a different cable and also got the same outcome. Register a Free 1 month Trial Account. I have also changed the resolution in the bluray player from automatic to 480i, 480p, and 720p.
. Check the fuse and the connector going to it. See how the lens is kind of hazy? Or, is there a quick and easy fix for this problem? I'm not afraid to tear into it though; since I got it for free I don't really care! Panasonic Hdtv Manual Model Pt50lc14 can be very useful guide, and panasonic hdtv manual model pt50lc14 play an important role in your products. I will contact some repair shops and see what they say. If the sound is present, then your ballast is most likely ok as it is trying to light the lamp. I just figured it would make a nice addition to my basement man cave, if I don't have to sink too much money into it! It won't turn on; instread the power button flashes green for a minute, and then switches to flashing red, and the lamp idicator flashes once every 5 seconds. From googling around this seems like a fairly common thing to run into, but I still haven't really found an answer to what is going on.
. . . . . .
. . . . . . .
. . . . . .
. . . . . . .
. . . . .