Check the temperature at which the thermostat first opens, and at which it is fully open. Remove the water outlet A. Acura is the luxury vehicle marque of Japanese automaker Honda. Disconnect the fan motor connectors, radiator fan switch connector, and compressor clutch connector. Remove the radiator cap A , wet its seal with engine coolant, then install it on the pressure tester B commercially available. They are very very well built cars and last a long time. Remove the clamp C from both ends of the lower radiator hose and remove them from the thermostat and quick connector.
Apply a pressure of 93 - 123 kPa 0. Variable Valve timing was used on both the intake and exhaust cams. Apply a pressure of 93 - 123 kPa 0. This kit was designed to be used on late model multi-point fuel injection type engines with 43 psi ± 5 psi fuel pressure. When installing the new lock to the connector, slide it straight down along the groove.
Install the radiator cap loosely. Type R version and a 6-speed manual transmission. Test the motor by connecting battery power to the B terminal and ground to the A terminal. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. The radiator cover is held in place by a series of pop-top fasteners. Check for a drop in pressure. Install the new lower radiator hose on the thermostat, and install the clamp.
Look at the coolant level in the reserve tank. The manuals are written in plain language and will be understandable, not only to the technically savvy driver with experience, but also to the beginner with a humanitarian mindset. The name Acura appeared in 1986 and relates only to the prestigious models of Honda. Clean and dry the water passage mating surfaces. The first model of the car of the company is developed on the basis of Honda Legend, equipped with a V-shaped six-cylinder engine, which had four body types: sedan, coupe and hatchbacks. Using this repair manual is an inexpensive way to keep your vehicle working properly.
External power supply is necessary when programming a detached odometer. I've owned the car for almost a year and I wanted to give everyone an unbiased review on it. The stock fog light opening covers are held in place with spring clips attached to the cover. Using a non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Wait until the engine is cool, then carefully remove the radiator cap and fill the radiator with engine coolant to the top of the filler neck. Make sure the engine and radiator are cool to the touch.
Attach the pressure tester A commercially available to the radiator. Work a finger between the cover and the bumper, and pull outward to release the cover. To test a closed thermostat: 1. Cars of mark Akura on technical parameters do not differ from corresponding parameters of models Honda. Disconnect the 2P connectors from the radiator fan motor and condenser fan motor. Remove the six bolts securing the water pump, then remove the water pump A. Remove the water passage A.
Replace the O-ring C in the quick connector. Remove the thermostat housing B. Inspect and clean the O-ring groove and mating surface with the water passage. Remove the upper radiator hose from the radiator. The manuals will help you to understand the various unforeseen situations during the operation of the car. Pull out the lock B by hand, then wiggle the quick connector, and remove it from the radiator.
Install the water passage C with a new O-ring D. Please Click Here Then Get More Information. Install the radiator in the reverse order of removal. Clean up any spilled engine coolant. Remove, drain, and reinstall the reverse tank. Check that it turns freely. Install the water pump with new O-rings in the reverse order of removal.